Marie Jay's Metal Products Co., Ltd
Model No.: 20171109002
Type: Ceramic wire drawing die
Material: Metal, Tungsten Carbide
Shaping Mode: Die Casting
Hole Type: Section Mould
Surface Treatment: Polish
Chemical Composition: WC+CO
Virgin Material: 100%
Export Market: Global
Material Grade: Various
Hole Diamentions: 0.1mm-20mm
Product Type: Wire Drawing Dies Mould
Grade: YG6, YG16C,YG6X, YG8, YG15 Etc
Packaging: in cartons
Productivity: 10000000 pieces per year
Place of Origin: Hunan
Supply Ability: 10000000 pieces per year
tungsten carbide wire drawing dies and mould
for different material like mild steel, high carbon, stainless steel, brass, aluminum and so on. All major wire producer can use drawing dies. There are there drawing dies, including wire drawing dies, bar drawing dies, tube drawing dies.
Usually refers to a variety of wire drawing mold, as well as pulling the fiber drawing die. All the center of the drawing die has a certain shape of the hole, round, square, octagonal or other special shape. When the metal is pulled through the die hole, the size becomes smaller, and even the shape changes. When the soft metal (such as gold and silver) is used, the steel mould is enough, and the steel mould can have many holes with different diameters.
Drawing Dies/Diamond Drawing Die
We supply wire drawing dies for copper, aluminum, brass, steel, stainless steel, etc.
Any inner hole and casing dimension is available.
Specifications no bigger than 0.3mm is natural diamond.
Bigger than 0.3mm is PCD.
1.Structure of dies:
The hole of the wire drawing dies is made up of four parts:
• Lubricating area of the entry: There is an arc to make the wires enters to the workaround conveniently.
• The workaround: The metals come about plastic deformation while drawing, the cross section of the metals is compressed and reduced.
• Diameter fixed district: to guarantee the size and form accurate and even, lengthen the service life of the die.
Copyright © 2019 Marie Jay's Metal Products Co., Ltd All rights reserved.